In order to update your Annaboto, you have to be on the same network.

  1. On the main page, select the robot you want to update.
  2. Once you're in the robot page, tap on the Annaboto.

  3. Tap on the Maintenance.

  4. Scroll to Manual Mode and tap the button. Then confirm.

  5. Tap the Toggle to set Manual Mode to YES and then confirm.

  6. To confirm, please see go back to the Annaboto screen and see the MANUAL MODE text on the Annaboto:

    NOTE: in Manual Mode, you will be responsible for making sure that the machine doesn't overfill or run out of water while filling.

    Here are the instructions:
    1. Make sure Waste Tank is Empty and Fresh Tank is Full.
    2. Press the Front Button Once to START draining.
    3. Press the Front Button a 2nd time to STOP draining and START filling. Please pay attention and make sure the water in the grow tank stays below 1 inch from the top. You can open the Waste Lid to see how far along the water is.
    4. Press the Front Button a 3rd time to STOP filling.

  7. That's it!