IMPORTANT SAFETY INSTRUCTIONS

When using this Annaboto electrical furnishing, basic precautions should always be followed, including the following: Read all instructions before using this Annaboto appliance. SAVE THESE INSTRUCTIONS    

  1. To reduce the risk of electric shock, the Annaboto has a specific plug. Do not change the plug in any way.

  2. DANGER – to reduce risk of electric shock: Always unplug the Annaboto from electrical outlet before cleaning.

  3. WARNING – to reduce risk of burns, fire, electric shock, or injury to persons: Unplug Annaboto from outlet before putting on or taking off parts.

  4. Please take proper precautions when operating an Annaboto near or by individuals requiring close supervision, including children.

  5. Use Annaboto only for its intended use as described in the instructions. Do not use attachments not recommended by manufacturer.

  6. Never operate Annaboto if it has a damaged cord or plug, if it is not working properly, if it has been dropped and damaged, or if it has been dropped in water. If any of these conditions occur/exist, contact support.Annaboto.com or your country’s local distributor for instructions.

  7. Keep cord away from heated surfaces.

  8. Never operate appliance with air openings blocked. Keep air openings free of lint, hair, and the like. 

  9. Never drop or insert any object into any electrical openings.

  10. Do not use outdoors.

  11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

  12. Do not touch moving parts or hot parts such as pumps, lights, reflective surfaces, and the like. 

  13. To disconnect, remove plug from outlet.

  14. Do not place or submerge base, cord, plug, or Light in water or other liquid to clean it.

  15. Do not allow water to contact hot LED Grow Lights.

  16. Use only approved and supplied parts and accessories. Use only Annaboto LED Grow Lights with this Annaboto model. Use of any other kind of accessory is not recommended. Replacement parts can be ordered from www.annaboto.com

  17. Do not use Annaboto for other than intended purpose.

  18. This product is intended for household and residential use only. This product is not approved for commercial applications.

  19. If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician in order to avoid a hazard.

  20. Electrical wiring must be in accordance with local regulations.

  21. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a person responsible for their safety.

  22.  Children should be supervised to ensure they do not play with the appliance.                                                

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.            

The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

U.S. CAUTION - You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.                

User Maintenance: Any servicing is to be performed by an authorized service representative. Use original packaging for storage when the appliance is not used.            

Disconnect power before servicing or replacing lights. Use only Annaboto LED Light replacement.                

DO NOT SUBMERGE 

HOUSEHOLD USE ONLY         

Do not immerse cord in water or other liquid, and unplug cord from outlet when not in use.