How do I set up WiFi on my Annaboto? : Annaboto

How do I set up WiFi on my Annaboto? Print

Created by: Carl Palme

Modified on: Fri, 23 Jun, 2023 at 2:55 PM

On the mobile app, go to Main Screen > WiFi
There, you will enter the WiFi name and Password
The App will generate a QR code that you have to show to the camera on the light
Now, press and hold the button on the Annaboto for 10 seconds to start the WiFi scanning process
Place the phone with the QR code under the light (in the center-back) about 8-12 inches below the light (the phone screen will dim, this is OK)
Hold for ~10 seconds or until the LED on the front turns white
Once the light is White, wait 10 seconds and turn OFF the Annaboto, then turn back ON. The machine will boot and the button in the front should be White. This means that the connection was successful and the machine is communicating with the cloud. Technology!
You are all set!

Note: If you ever need to reconfigure the WiFi, press the front button for ~5 seconds until the light blinks magenta and repeat the steps above

Carl is the author of this solution article.

Did you find it helpful? Yes No

How do I set up WiFi on my Annaboto? Print